Pressurized Solar Water Heater

Stainless steel solar water heater, integrated pressurized system, JY-2X, type of our company products which made up of heat pipe vacuum, pressurized water tank, stainless steel frame and whole kit of stainless steel fasteners etc.
Pressurized solar water heater utilizes high absorption rate and low projection rate coating of vacuum tub, and it changes solar radiation into heat energy, Meanwhile, the copper pipe inside the vacuum tube could quickly transfer the heat into the water tank, eventually it leads to gradually increase water temperature in the whole water tank, Vacuum tube could work as long as it has sun radiation.
Work Principle:

There are two vacuums in an all-glass heat pipe, the one in the inner tube and the one between the inner and the outer tube. The inner tube absorbs the solar energy, which is transferred to heat. The temperature in the inner tube rises up and the transfer fluid in the inner tube vaporizes. The vapor rises up to the condenser where it transfers the heat to the water in the tank, so the vapor loses its heat and condenses, then flows down to the bottom of the tube.
Specifications:
1. Tank capacity: 100, 150L, 200L, 250L, 300L,
2. Outer tank: Stainless steel 0.50mm thickness;
3. Inner tank: Food grade SUS304-2B stainless steel 1.20mm thickness;
4. Frame: High quality galvanized sheet painted metal of 1.50mm thickness or stainless steel;
5. Evacuated tube: 47*1800mm, 58mm*1800mm;
7. Preserved layer: 60mm foamed polyurethane.
Features:
1. It can withstand pressure of tap water when it works;
2. There is no need to wait;
3. Completely automatic operation;
4. Drinking water quality to promote life quality;
5. Temperature preservation can last for 72 hours;
6. Without volatile tubes;
7. Without incrusting, long usage life.